AllSure bij AllSmart

Niet goed, geld terugNiet goed, geld terug

Gratis verzendingGratis verzending

Eenvoudig en kosteloos retournerenGratis retourneren

Snelle leveringSnelle levering

Veilig winkelen en betalenVeilig winkelen

Everspring Z-Wave Flood sensor / overstroming

De overstromings sensor is te gebruiken tegen lekkages. De sensor verstuurt een alarm bericht in geval van overstroming of lekkage.

€ 38,95


EVR_ST812

Aantal:     


Favoriet     
Deel dit product met uw familie, vrienden en kennissen. Maak ook hun leven makkelijker en slimmer.

This sensor monitors leakage and sends an alarm when flooding or leakage is detected. The sensing device can be away up to 3 m from the main device. The unit can be mounted on every flat surface. The installation can be done with screws or double-sided tape.The ST812 is a battery-powered device, which is in non-operating state unless an action is detected. After a programmable sleeping time the device wakes up and sends status information. After this the unit goes back to non-operating state. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The units send information to a controller or any other associated Z-Wave device. Up to 4 devices can be controlled from this device.The device needs to be included into a Z-Wave network by a remote control or any other Z- Wave controller. For configuration of certain behavior a static controller such as a PC with home automation software or a gateway is recommended.

x
pname

Product is toegevoegd aan uw winkelmandje.

« Verder winkelen Afrekenen »
x
Fout

er is een probleem.

« Verder winkelen